1. general description the 74alvc541-q100 is an octal non-inverting buffer/line driver with 3-state bus compatible outputs. the output enable inputs oe 0 and oe 1, control the 3-state outputs. a high on oe n causes the outputs to assume a high-impedance off-state. this product has been qualified to the automotive electronics council (aec) standard q100 (grade 3) and is suitable for use in automotive applications. 2. features and benefits ? automotive product qualif ication in accordance with aec-q100 (grade 3) ? specified from ? 40 ? c to +85 ? c ? wide supply voltage range from 1.65 v to 3.6 v ? 3.6 v tolerant inputs/outputs ? cmos low power consumption ? direct interface with ttl levels (2.7 v to 3.6 v) ? power-down mode ? latch-up performance exceeds 250 ma ? complies with jedec standard: ? jesd8-7 (1.65 v to 1.95 v) ? jesd8-5 (2.3 v to 2.5 v) ? jesd8b/jesd36 (2.7 v to 3.6 v) ? esd protection: ? mil-std-883, method 3015 exceeds 2000 v ? hbm jesd22-a114f exceeds 2000 v ? mm jesd22-a115-a exceeds 200 v (c = 200 pf, r = 0 ? ) 74alvc541-q100 octal buffer/line driver; 3-state rev. 1 ? 19 may 2014 product data sheet
74alvc541-q100 all information provided in this document is subject to legal disclaimers. ? nxp semiconductors n.v. 2014. all rig hts reserved. product data sheet rev. 1 ? 19 may 2014 2 of 16 nxp semiconductors 74alvc541-q100 octal buffer/line driver; 3-state 3. ordering information 4. functional diagram table 1. ordering information type number package temperature range name description version 74alvc541d-q100 ? 40 ? cto+85? c so20 plastic small outline package; 20 leads; body width 7.5 mm sot163-1 74alvc541pw-q100 ? 40 ? cto+85? c tssop20 plastic thin shrink small outline package; 20 leads; body width 4.4 mm sot360-1 74ALVC541BQ-Q100 ? 40 ? cto+85? c dhvqfn20 plastic dual-in-line compatible thermal enhanced very thin quad flat package no leads; 20 terminals; body 2.5 ? 4.5 ? 0.85 mm sot764-1 fig 1. logic symbol fig 2. iec logic symbol $ $ $ $ $ $ $ $ < |